Keep sediment and other pollutants from entering the water system with Ultra-Drain Guard catch basin insets.
Stormwater pollution has become a major concern both locally and on a national level. Ultra-Drain Guards remove waste from stormwater before it can become a problem in the water system.
Installation is easily accomplished in just a few minutes.
Step 1 – remove grate.
Step 2 – Inset DrainGuard. Hold in place temporarily with tape.
Step 3 – replace grate. Trim excess material if desired.
Designed for practical use in:
Industrial facilities – keep oil and other Containments from entering storm drains.
Construction sites – tubular design captures eroded soil and wind-blown debris.
Parking lots, “Drive-up” retail facilities – polypropylene geotextiles collect oil, fuel and other contaminants that drip from cars.
Unique PopUp capacity indicator automatically signals when its time to install a new Ultra-Drain Guard.
Heavy duty magnet securely attaches the reusable indicator to the bottom of the grate.
A tether is attached to a release hook which disengages when the DrainGuard has reached its capacity.
The bright red end cap “pops up” through the grate to visually alert maintenance personnel that the DrainGuard needs to be emptied or replaced. The spring-loaded device can be driven over even in the “popped up” position.
The Trash and Debris model is designed specifically to catch larger items such as cigarette butts, candy wrappers and paper goods.
The total water flow rate through the insert in new condition is in excess of 500 gpm. The overflow rate is approximately 250 gpm.
Note: The PopUp capacity indicator is not designed for use with the Trash and Debris Model.
U.S patent no. 5372714 ; 5575925.
Accessories: PopUp capacity indicator (part #9236), Grate lifting hook (part #9235).
Helps Comply With NPDES, 40 CFR 122.26 (1999) And TMDL Requirements.